Shanghai Kangquan Valve Co., Ltd.

Structural features:
1. Distinctive seating structure according to the extent of pressure, medium properties and sealing requirements, fixed ball valve may be made to front seal structure, back structure, or front-back dual seal

structure.
2. Self-relieving structure In case of abnormal rise of pressure at middle cavity, ball valve of single seal structure is provided with self-relieving function, while ball valve of dual seal structure uses the auxiliary pressure relief device on valve body to carry out pressure relief.
3. First aid of seal the valve designed with an auxiliary Seating emergency seal system, as shown in the figure.In case of soft seal damaged, or failure of seal in an emergency circumstance, emergency seal may be effected by injecting in sealant through auxiliary sealing system. If needed, emergency seal assembly can be used to rinse and lubricate the seating area.Plus, valve system can also be designed with an auxiliary emergency sealing system.
4. Fire protection structure If requested by working conditions and users, ball valve may be designed to fireproof. The fireproofing design of ball valve is to the standards of API 607 and JB/T6899. In case of soft seal ring burnt in fire, the fire protection structure of ball valve functions to prevent mediums from mass leakage, thus to avoid fire spreading.
5. Antistatic structure when operating the valve, the friction between the ball and seat will produce electrostatic charge that can be accumulated on the ball. To prevent static spark, an antistatic device is placed on the valve to derive the electric charge accumulated on the ball(as show in the figure)

6. Lock device To prevent misoperation and the unexpected open or closed caused by the unpredicted circuit vibration, a locking device is designed at the fully opened and closed positions of hand operated ball valve. This design is proven especially good and effective in the production line of inflammable mediums of petroleum and chemicals, or when valves are mounted outdoors.
7. Full and reduced bores structure To meet the different requirements of users, we have full and reduced
bore valves series(as shown in the figure). The inside diameter of full-bore series ball valve is

comparatively
lighter in weight, but its fluid resistance is only 1/7 of that of globe valve of the same caliber. So,reduced-bore ball valves boast of broader prospects.
8. Discharge device on valve body If requested by users or by the system, discharge valve may be mounted on the body of ball valve. In case the two ends of valve have been sealed,the pressure in valve will be released through the discharge valve on the body. Besides the function of DBB, this discharge valve also functions to rinse and blow out the deposits inside valve body.
9. Corrosion resistance corrosion allowance is left for the design of body thickness, the stem, fixed shaft, ball, seat and bottom cover of carbon steel valve are all chemical plated in surface to ASTM B733 and B656. Use of paint from international co. to deal with all kinds of conditions.
10.Sulfide stress cracking resistance the materials exposed to fluid of our sulfur resisting ball valves, including fastening components, are all selected to NACE MR0175.Rigorous quality control and

inspection is implemented in the manufacturing process to make our products conformed to the standard and suitable for vulcanizing conditions.
11. Extension bar device extension device may be provided for buried ball valve, which include the
extension of valve stem, greasing valve and discharge valve. As shown in the figure, users shall specify the requirements and length to be extended(the length is generally the distance from the center of valve channel to the center of operating device).