Wenzhou Runxin Manufacturing Machine Co., Ltd.

Features:
1) It could set up interval backwash times. It could set up interval backwash time to F68, F69 up-flow Regeneration valve. Which is mean it running several times Then backwash one time. It's according to ldegrees Centigradeal corrupt degree to set up interval times.

2) Two modes of flow meter By changing the prdegrees Centigradeess parameter to Realize to change the mode to be volume delay or volume Timely. A-01 is volume delayed (Water treatment capacity will Realize regeneration when set volume and set time). A-02 is Volume timely (Water treatment capacity will realize Regeneration when set volume)

3) It could set up maximum interval regeneration days This parameter means no matter how much flux it is set, or How much flux treated, when it exceeds the maximum Interval regeneration days (could be set within 0 to 40 days), Then it will start up regeneration although the flux is not Reached at the set value.

Technical Parameter:
1) Water Inlet/Outlet: 3/4"M
2) Drain: 1/2"M
3) Rinse Pipe: 1.05"OD
4) Base: 2-1/2" 8NPSM
5) Brine Tank Connection: 3/8"M
6) Water Capacity: 2t/h
7) Tank Diameter Range for Softens: 6"-12"

Design parameters:
1) Controller model: Volume Type
2) Suited pressure: 0.1 - 0.6MPa
3) Transformer input: 80~240V / 50~60Hz
4) Suited water temperature: 5-45 degrees Centigrade

Range of Application:
1) Household purify, soften system.
2) Boiler softening water system.
3) RO pre-treatment system.
4) Swimming pool filters equipment.
5) Ion exchange equipment.

Packing: 6PCS/CTN
Carton dimension: 835*420*185MM